UCR 2008 Setup
Parameter
80-bit SRTCP
IP Addressing Mode
IP Addressing Mode
Preference for Signaling
Set Up UCR 2008 in Common Device Configuration
Use this procedure to set the following UCR 2008 parameters:
• IP Addressing Mode
• IP Addressing Mode Preference for Signaling
Procedure
Step 1
In Cisco Unified Communications Manager Administration, choose Device > Device Settings > Common
Device Configuration.
Step 2
Set the IP Addressing Mode parameter.
Step 3
Set the IP Addressing Mode Preference for Signaling parameter.
Step 4
Select Save.
Set Up UCR 2008 in Common Phone Profile
Use this procedure to set the following UCR 2008 parameters:
• FIPS Mode
• SSH Access
• 80-bit SRTCP
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
130
Administration path
Device > Device Settings > Common Phone Profile
System > Enterprise Phone Configuration
Device > Device Settings > Common Device Configuration
Device > Device Settings > Common Device Configuration