Modify Phone Button Template For Pab Or Fast Dial; Set Up Rtp/Srtp Port Range - Cisco 7821 Administration Manual

Set Up RTP/sRTP Port Range

Modify Phone Button Template for PAB or Fast Dial

You can modify a phone button template to associate a service URL with a programmable button. Doing so
provides users with single-button access to the PAB and Speed Dials. Before you modify the phone button
template, you must configure PAB or Speed Dials as an IP Phone service.
For more information about IP Phone services, see "Cisco Unified IP Phone Services Configuration" chapter
in the Cisco Unified Communications Manager Administration Guide. For more information about configuring
line buttons, see "Cisco Unified IP Phone Configuration" chapter and "Configuring Speed-Dial Buttons" section
in the Cisco Unified Communications Manager Administration Guide.
Procedure
Step 1
From Cisco Unified Communications Manager Administration, choose Device > Device Settings > Phone
Button Template.
Step 2 Click Find.
Step 3 Select the phone model.
Step 4
Select Copy, enter a name for the new template, and then select Save.
The Phone Button Template Configuration window opens.
Step 5 Identify the button that you would like to assign, and select Service URL from the Features drop-down list
that associates with the line.
Step 6 Select Save to create a new phone button template that uses the service URL.
Step 7 Choose Device > Phone and open the Phone Configuration window for the phone.
Step 8
Select the new phone button template from the Phone Button Template drop-down list.
Step 9 Select Save to store the change and then select Reset to implement the change.
The phone user can now access the Self Care Portal and associate the service with a button on the phone.
Set Up RTP/sRTP Port Range
You configure the Real-Time Transport Protocol (RTP) and secure Real-Time Transport Protocol (sRTP)
port values in the SIP profile. RTP and sRTP port values range from 2048 to 65535, with a default range of
16384 to 32764. Some port values within the RTP and sRTP port range are designated for other phone services.
You cannot configure these ports for RTP and sRTP.
For more information, see the "SIP profile setup" chapter, in the Cisco Unified Communications Manager
Administration Guide.
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
138