Cisco 7811 Manual
Hide thumbs
Also See for 7811:
- User manual (102 pages) ,
- Quick reference card (2 pages) ,
- Getting started (2 pages)
Table of Contents
Advertisement
Quick Links
Wall Mounts
•
•
•
•
•
Wall Mount Kits
Each wall mount is unique to your phone model and cannot be used for another phone. If you are planning
to attach your phone to a wall, purchase the wall mount kit specific to your phone.
For part numbers and other additional information, refer to the phone model data sheet. The Cisco IP Phone
8800 Series data sheets can be found here
unified-ip-phone-8800-series/datasheet-listing.html. The Cisco IP Phone 7800 Series data sheets can be found
here
datasheet-listing.html.
To check which phone model you have, press Applications
number field shows your phone model.
Table 1: Wall Mount Kits
Cisco IP Phone
Cisco IP Phone 7811
Cisco IP Phone 7821 and 7841
Cisco IP Phone 7861
Wall Mount Kits, on page 1
Non-Lockable Wall Mount Components for 7811, on page 2
Non-Lockable Wall Mount Components, on page 9
Non-Lockable Wall Mount Components for 7861, on page 17
Adjust the Handset Rest, on page 25
https://www.cisco.com/c/en/us/products/collaboration-endpoints/unified-ip-phone-7800-series/
Cisco Wall Mount Kit
Spare Wallmount Kit for Cisco IP Phone 7811
(CP-7811-WMK=)
Spare Wallmount Kit for Cisco IP Phone 7800 Series
(CP-7800-WMK=)
Spare Wallmount Kit for Cisco IP Phone 7861
(CP-7861-WMK=)
https://www.cisco.com/c/en/us/products/collaboration-endpoints/
and select Phone information. The Model
Notes
Wall Mounts
1
Advertisement
Table of Contents
Related Manuals for Cisco 7811
Summary of Contents for Cisco 7811
-
Page 1: Wall Mounts
For part numbers and other additional information, refer to the phone model data sheet. The Cisco IP Phone 8800 Series data sheets can be found here https://www.cisco.com/c/en/us/products/collaboration-endpoints/... -
Page 2: Non-Lockable Wall Mount Components For 7811
Non-Lockable Wall Mount Components for 7811 Non-Lockable Wall Mount Components for 7811 The following figure shows the components of the Cisco IP Phone 7811 Wall Mount Kit. Figure 1: Wall Mount Kit Components for 7811 The package includes these items: •... -
Page 3: Install The Non-Lockable Wall Mount Kit For 7811
Wall Mounts Install the Non-Lockable Wall Mount Kit for 7811 Figure 3: Side View of ADA Non-Lockable Wall Mount Kit Installed on Phone Install the Non-Lockable Wall Mount Kit for 7811 The wall mount kit can be mounted on most surfaces, including concrete, brick, and similar hard surfaces. - Page 4 Wall Mounts Install the Non-Lockable Wall Mount Kit for 7811 Figure 4: Bracket Installation Step 2 Attach the phone bracket to the IP Phone. a) Detach the power cord and other attached cords from the base of the phone, except the handset cord (and headset cord, if there is a headset).
- Page 5 Wall Mounts Install the Non-Lockable Wall Mount Kit for 7811 Figure 5: Phone Bracket Attachment Screw holes Step 3 Attach the cables to the phone: a) Attach the Ethernet cable to the 10/100/1000 SW network port and wall jack. b) (Optional) If you are connecting a network device (such as a computer) to the phone, attach the cable to the 10/100/1000 Computer (PC access) port.
- Page 6 Wall Mounts Install the Non-Lockable Wall Mount Kit for 7811 Figure 6: Cable Attachment Phone Bracket Handset Port Network Port AC Adapter Port Wall Bracket Optional Power Cable Step 4 Attach the phone to the wall bracket by inserting the tabs on the top of the wall bracket into the slots on the phone bracket.
-
Page 7: Remove The Phone From The Non-Lockable Wall Mount For 7811
Wall Mounts Remove the Phone from the Non-Lockable Wall Mount for 7811 Figure 7: Phone to Wall Bracket Attachment Step 5 Press the phone firmly into the wall bracket and slide the phone down. The tabs in the bracket click into position. - Page 8 Wall Mounts Remove the Phone from the Non-Lockable Wall Mount for 7811 Figure 8: Tab Location To remove the phone and mounting plate from the wall bracket, you must disengage these tabs. Before you begin You require two screwdrivers or metal rods.
-
Page 9: Non-Lockable Wall Mount Components
Press firmly to disengage the tabs and move the phone up at the same time to release the phone from the wall bracket. Non-Lockable Wall Mount Components The following figure shows the components of the Cisco IP Phone 7800 Series Wall Mount Kit. Figure 10: Wall Mount Kit Components The package includes these items: •... - Page 10 Wall Mounts Non-Lockable Wall Mount Components • Two M2.5 x 6-mm machine screws • One 6-inch Ethernet cable This section describes how to install and remove the ADA nonlockable wall mount kit. Figure 11: Back View of ADA Non-Lockable Wall Mount Kit Installed on Phone Figure 12: Side View of ADA Non-Lockable Wall Mount Kit Installed on Phone Wall Mounts...
-
Page 11: Install The Non-Lockable Wall Mount Kit
Wall Mounts Install the Non-Lockable Wall Mount Kit Install the Non-Lockable Wall Mount Kit The wall mount kit can be mounted on most surfaces, including concrete, brick, and similar hard surfaces. To mount the kit on concrete, brick, or similar hard surfaces, you must provide the appropriate screws and anchors for your wall surface. - Page 12 Remove the label covers that conceal the screw holes. Cisco IP Phone 7811 does not have label covers. Note c) Attach the phone bracket by inserting the tabs into the mounting tabs on the back of the phone. The phone ports should be accessible through the holes in the bracket.
- Page 13 Wall Mounts Install the Non-Lockable Wall Mount Kit Figure 14: Phone Bracket Attachment Screw holes Slots for mounting tabs Step 3 Attach the cables to the phone: a) Attach the Ethernet cable to the 10/100/1000 SW network port and wall jack. b) (Optional) If you are connecting a network device (such as a computer) to the phone, attach the cable to the 10/100/1000 Computer (PC access) port.
- Page 14 Wall Mounts Install the Non-Lockable Wall Mount Kit Figure 15: Cable Attachment Phone Bracket Handset Port Network Port AC Adapter Port Wall Bracket Optional Power Cable Step 4 Attach the phone to the wall bracket by inserting the tabs on the top of the wall bracket into the slots on the phone bracket.
-
Page 15: Remove The Phone From The Non-Lockable Wall Mount
Wall Mounts Remove the Phone from the Non-Lockable Wall Mount Figure 16: Phone to Wall Bracket Attachment Step 5 Press the phone firmly into the wall bracket and slide the phone down. The tabs in the bracket click into position. Step 6 Proceed to Adjust the Handset Rest, on page... - Page 16 Wall Mounts Remove the Phone from the Non-Lockable Wall Mount Figure 17: Tab Location To remove the phone and mounting plate from the wall bracket, you must disengage these tabs. Before you begin You require two screwdrivers or metal rods. Procedure Step 1 Push the screwdrivers into the left and right holes in the phone mounting plate approximately 1 in.
-
Page 17: Non-Lockable Wall Mount Components For 7861
Press firmly to disengage the tabs and move the phone up at the same time to release the phone from the wall bracket. Non-Lockable Wall Mount Components for 7861 The following figure shows the components of the Cisco IP Phone 7861 Wall Mount Kit. Figure 19: Wall Mount Kit Components for 7861 The package includes these items: •... - Page 18 Wall Mounts Non-Lockable Wall Mount Components for 7861 • Four M4 x 25-mm Phillips-head screws with four anchors • Two M3 x 7-mm Self-tapping screws • One 200-mm Ethernet cable This section describes how to install and remove the ADA nonlockable wall mount kit. Figure 20: Back View of ADA Non-Lockable Wall Mount Kit Installed on Phone Wall Mounts...
-
Page 19: Install The Non-Lockable Wall Mount Kit For 7861
Wall Mounts Install the Non-Lockable Wall Mount Kit for 7861 Figure 21: Side View of ADA Non-Lockable Wall Mount Kit Installed on Phone Install the Non-Lockable Wall Mount Kit for 7861 The wall mount kit can be mounted on most surfaces, including concrete, brick, and similar hard surfaces. To mount the kit on concrete, brick, or similar hard surfaces, you must provide the appropriate screws and anchors for your wall surface. - Page 20 Wall Mounts Install the Non-Lockable Wall Mount Kit for 7861 a) Hold the bracket on the wall and place it so that the arrow on the back of the bracket points up. b) Use the level to ensure that the bracket is level and use a pencil to mark the screw holes. c) Using a #2 Phillips-head screwdriver, carefully center the anchor over the pencil mark and press the anchor into the wall.
- Page 21 Wall Mounts Install the Non-Lockable Wall Mount Kit for 7861 Figure 23: Phone Bracket Attachment Screw holes Slot for Mounting Tabs Step 3 Attach the cables to the phone: a) Attach the Ethernet cable to the 10/100/1000 SW network port and wall jack. b) (Optional) If you are connecting a network device (such as a computer) to the phone, attach the cable to the 10/100/1000 Computer (PC access) port.
- Page 22 Wall Mounts Install the Non-Lockable Wall Mount Kit for 7861 Figure 24: Cable Attachment Phone Bracket Handset Port Network Port AC Adapter Port Wall Bracket Optional Power Cable Step 4 Attach the phone to the wall bracket by inserting the tabs on the top of the wall bracket into the slots on the phone bracket.
- Page 23 Wall Mounts Remove the Phone from the Non-Lockable Wall Mount Figure 25: Phone to Wall Bracket Attachment Step 5 Press the phone firmly into the wall bracket and slide the phone down. The tabs in the bracket click into position. Step 6 Proceed to Adjust the Handset Rest, on page...
- Page 24 Wall Mounts Remove the Phone from the Non-Lockable Wall Mount Figure 26: Tab Location To remove the phone and mounting plate from the wall bracket, you must disengage these tabs. Before you begin You require two screwdrivers or metal rods. Procedure Step 1 Push the screwdrivers into the left and right holes in the phone mounting plate approximately 1 in.
-
Page 25: Adjust The Handset Rest
Wall Mounts Adjust the Handset Rest Figure 27: Disengage Tabs Step 3 Press firmly to disengage the tabs and move the phone up at the same time to release the phone from the wall bracket. Adjust the Handset Rest If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the handset rest to ensure that the receiver does not slip out of the cradle. - Page 26 Wall Mounts Adjust the Handset Rest Procedure Step 1 Remove the handset from the cradle and pull the plastic tab from the handset rest. Step 2 Rotate the tab 180 degrees. Step 3 Hold the tab between two fingers, with the corner notches facing you. Step 4 Line up the tab with the slot in the cradle and press the tab evenly into the slot.