Network Statistics Fields - Cisco 7821 Administration Manual

Cisco IP Phone Status
Procedure
Step 1 Press Applications.
Step 2 Select Admin Settings.
Step 3 Select Status.
Step 4
Select Status > Network Statistics.
Step 5 To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press Clear.
Step 6
To exit the Network Statistics screen, press Back .

Network Statistics Fields

The following table describes the information in the Network Statistics screen.
Table 18: Network Statistics Fields
Item
Tx Frames
Tx Broadcasts
Tx Unicast
Rx Frames
Rx Broadcasts
Rx Unicast
Neighbor Device ID:
• Neighbor IP Address
• Neighbor Port
Restart Cause: One of these values:
• Hardware Reset (Power-on reset)
• Software Reset (memory controller
also reset)
• Software Reset (memory controller
not reset)
• Watchdog Reset
• Unknown
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
154
Description
Number of packets sent by the phone
Number of broadcast packets sent by the phone
Total number of unicast packets transmitted by the phone
Number of packets received by the phone
Number of broadcast packets received by the phone
Total number of unicast packets received by the phone
Identifier of a device connected to this port discovered by CDP
protocol.
Cause of the last reset of the phone