Set Admin Vlan Id Field; Set Pc Vlan Field; Set Sw Port Configuration Field - Cisco Unified 6921 Administration Manual

Cisco Unified IP Phone Settings

Set Admin VLAN ID Field

Procedure
Step 1
Scroll to the Admin. VLAN ID option, press Edit , and then enter a new Admin VLAN setting.
Step 2 Press Apply, and then press Save.

Set PC VLAN Field

Procedure
Step 1 Make sure the Admin VLAN ID option is set.
Step 2 Scroll to the PC VLAN option, press Edit, and then enter a new PC VLAN setting.
Step 3 Press Apply, and then press Save.

Set SW Port Configuration Field

Procedure
Step 1 Unlock network setup options.
Step 2
Scroll to the SW Port Setup option and then press Edit.
Step 3 Scroll to the setting that you want and then press Select.
Step 4 To configure the setting on multiple phones simultaneously, enable the Switch Port Remote Configuration in
the Enterprise Phone Configuration (System > Enterprise Phone Configuration).
Note
If the ports are configured for Switch Port Remote Configuration in Unified Communications Manager,
the data cannot be changed on the phone.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager
Set Admin VLAN ID Field
10.0 (SCCP and SIP)
7