Make Phone Discoverable; Set Bluetooth Device Name; External Monitor; Connect External Monitor - Cisco DX650 User Manual

Make Phone Discoverable

Make Phone Discoverable
Tap the name of your phone to make it discoverable. Your phone remains discoverable for 120 seconds.

Set Bluetooth Device Name

Procedure
Step 1 Tap More.
Step 2 Tap Rename Device.
Step 3 Enter a device name and tap Rename.

External Monitor

Connect your phone to a monitor by inserting one end of an HDMI type A cable into the HDMI port and the
other end into a monitor HDMI port.
There are two display modes for an external monitor. In mirror mode, the content that is displayed on the
phone screen is also shown on the external monitor. In dual independent display mode, the external monitor
functions as a second, independent screen.
Cisco DX650 supports the following external monitor resolutions:
• 1920 x 1200 (WUXGA)
• 1920 x 1080 (1080p)
• 1680 x 1050
• 1280 x 720 (720p)
If your phone enters sleep mode, the external monitor enters sleep mode, too. When the phone is locked, the
external monitor is also locked and cannot be used until the phone is unlocked.
You can move applications to or from the external monitor. Moving the Browser application causes the
application to restart. You cannot have more than one instance of an application running at the same time.
A mouse and a keyboard can be used on both the internal screen and an external monitor. Support exists for
mouse panning. The keyboard follows the focus of the mouse.

Connect External Monitor

Procedure
Insert one end of an HDMI cable into the HDMI port and the other end into a monitor HDMI port.
Cisco DX650 User Guide, Release 10.2(2)
102
Accessories