Displaying Statistics; Displaying Pim And Pim6 Statistics; Clearing Pim And Pim6 Statistics - Cisco Nexus 7000 Series Configuration Manual

Configuring PIM and PIM6
Command
show ip [v6] pim route {source group | group
[source]} [vrf vrf-name | all]
show ip [v6] pim rp [vrf vrf-name | all]
show ip [v6] pim rp-hash [vrf vrf-name | all]
show running-configuration pim[6]
show startup-configuration pim[6]
show ip [v6] pim vrf [vrf-name | all] [detail]
For detailed information about the fields in the output from these commands, see the Cisco Nexus 7000 Series
NX-OS Multicast Routing Command Reference.

Displaying Statistics

You can display and clear PIM and PIM6 statistics by using the commands in this section.

Displaying PIM and PIM6 Statistics

You can display the PIM and PIM6 statistics and memory usage using the commands listed in the table below.
Use the show ip form of the command for PIM and the show ipv6 form of the command for PIM6.
Command
show ip [v6] pim policy statistics
show ip [v6] pim statistics [vrf vrf-name | all]
For detailed information about the fields in the output from these commands, see the Cisco Nexus 7000 Series
NX-OS Multicast Routing Command Reference.

Clearing PIM and PIM6 Statistics

You can clear the PIM and PIM6 statistics using the commands listed in the table below. Use the show ip
form of the command for PIM and the show ipv6 form of the command for PIM6.
Description
Displays information for each multicast route,
including interfaces on which a PIM join for that
(S, G) has been received.
Displays rendezvous points (RPs) known to the
software, how they were learned, and their group
ranges. For similar information, see also the show ip
pim group-range command.
Displays the bootstrap router (BSR) RP hash
information. For information about the RP hash, see
RFC 5059.
Displays the running-configuration information.
Displays the startup-configuration information.
Displays per-VRF information.
Description
Displays policy statistics for Register, RP, and
join-prune message policies.
Displays global statistics. If PIM is in vPC mode,
displays vPC statistics.
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
Displaying Statistics
117