Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual page 486

Gathering Information
Number of SNMP get requests = 0
Number of error traps sent = 0
Number of alert traps sent = 0
sensor#
Display the statistics for the SDEE server:
Step 12
sensor# show statistics sdee-server
General
Open Subscriptions = 0
Blocked Subscriptions = 0
Maximum Available Subscriptions = 5
Maximum Events Per Retrieval = 500
Subscriptions
sensor#
Display the statistics for the transaction server:
Step 13
sensor# show statistics transaction-server
General
totalControlTransactions = 35
failedControlTransactions = 0
sensor#
Display the statistics for the transaction source:
Step 14
sensor# show statistics transaction-source
General
totalControlTransactions = 0
failedControlTransactions = 0
sensor#
Display the statistics for Web Server:
Step 15
sensor# show statistics web-server
listener-443
number of server session requests handled = 61
number of server session requests rejected = 0
total HTTP requests handled = 35
maximum number of session objects allowed = 40
number of idle allocated session objects = 10
number of busy allocated session objects = 0
crypto library version = 6.0.3
sensor#
To clear the statistics for an application, for example, the logging application:
Step 16
sensor# show statistics logger clear
The number of Log interprocessor FIFO overruns = 0
The number of syslog messages received = 141
The number of <evError> events written to the event store by severity
Fatal Severity = 0
Error Severity = 14
Warning Severity = 142
TOTAL = 156
The number of log messages written to the message log by severity
Fatal Severity = 0
Error Severity = 14
Warning Severity = 1
Timing Severity = 0
Debug Severity = 0
Unknown Severity = 28
TOTAL = 43
The statistics were retrieved and cleared.
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
C-60
Appendix C Troubleshooting
78-16527-01