Upgrading The Maintenance Partition - Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual

Chapter 17 Upgrading, Downgrading, and Installing System Images
64 bytes from 10.89.146.114: icmp_seq=3 ttl=254 time=141 usec
64 bytes from 10.89.146.114: icmp_seq=4 ttl=254 time=127 usec
--- 10.89.146.114 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max/mdev = 0.127/0.182/0.381/0.099 ms
guest@idsm2.localdomain#
Reset IDSM-2:
Step 16
Note
guest@idsm2.localdomain# reset
guest@idsm2.localdomain#
Broadcast message from root Fri Mar 11 22:04:53 2005...
The system is going down for system halt NOW !!
[Connection to 127.0.0.111 closed by foreign host]
router#

Upgrading the Maintenance Partition

This section describes how to upgrade the maintenance partition, and contains the following topics:
•
•
Catalyst Software
To upgrade the maintenance partition, follow these steps:
Download the IDSM-2 maintenance partition file (c6svc-mp.2-1-1.bin.gz) to the FTP root directory of
Step 1
a FTP server that is accessible from your IDSM-2. For the procedure for locating software on Cisco.com,
see
Log in to the IDSM-2 CLI.
Step 2
Enter configuration mode:
Step 3
idsm2# configure terminal
Upgrade the maintenance partition:
Step 4
idsm2# upgrade ftp://user@ftp_server_IP_address/directory_path
You are asked whether you want continue.
Type
Step 5
78-16527-01
You cannot specify a partition when issuing the reset command from the maintenance partition.
IDSM-2 boots to whichever partition is specified in the boot device variable. If the boot device
variable is blank, IDSM-2 boots to the application partition.
Catalyst Software, page 17-35
Cisco IOS Software, page 17-36
Obtaining Cisco IPS Software, page
to continue. The maintenance partition file is upgraded.
y
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
18-1.
Installing System Images
/
c6svc-mp.2-1-1.bin.gz
17-35