Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual page 331

Chapter 17 Upgrading, Downgrading, and Installing System Images
Default Gateway : 0.0.0.0
Nameserver(s)
guest@localhost.localdomain#
Configure the maintenance partition host configuration:
Step 7
Specify the IP address:
a.
guest@localhost.localdomain# ip address ip_address netmask
Specify the default gateway:
b.
guest@localhost.localdomain# ip gateway gateway_ip_address
c. Specify the hostname:
guest@localhost.localdomain# ip host hostname
View the maintenance partition host configuration:
Step 8
guest@idsm2.localdomain# show ip
IP address
Subnet Mask
IP Broadcast
DNS Name
Default Gateway : 10.89.149.126
Nameserver(s)
guest@idsm2.localdomain#
Verify the image installed on the application partition:
Step 9
guest@idsm2.localdomain# show images
Device name
-----------
Hard disk(hdd)
guest@idsm2.localdomain#
Step 10 Verify the maintenance partition version (including the BIOS version):
guest@idsm2.localdomain# show version
Maintenance image version: 2.1(2)
mp.2-1-2.bin : Thu Nov 18 11:41:36 PST 2004 :
integ@kplus-build-lx.cisco.com
Line Card Number :WS-SVC-IDSM2-XL
Number of Pentium-class Processors : 2
BIOS Vendor: Phoenix Technologies Ltd.
BIOS Version: 4.0-Rel 6.0.9
Total available memory: 2012 MB
Size of compact flash: 61 MB
Size of hard disk: 19077 MB
Daughter Card Info: Falcon rev 3, FW ver 2.0.3.0 (IDS), SRAM
guest@idsm2.localdomain#
Upgrade the application partition:
Step 11
guest@idsm2.localdomain# upgrade
ftp://jsmith@10.89.146.11//RELEASES/Latest/5.0-1/WS-SVC-IDSM2-K9-sys-1.1-a-5.0-1.bin.gz
Downloading the image. This may take several minutes...
Password for jsmith@10.89.146.114:
78-16527-01
:
: 10.89.149.74
: 255.255.255.128
: 10.255.255.255
: idsm2.localdomain
:
Partition#
----------
1
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
Installing System Images
Image name
----------
5.0(1)
8 MB, SDRAM 256 MB
17-29