Displaying Statistics - Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual

Displaying Statistics

The statistics have all been cleared except for the
exec Clear commands during uptime
Displaying Statistics
Use the show statistics virtual-sensor [clear] command to display the statistics for the virtual sensor.
Use the show statistics [analysis-engine | authentication | denied-attackers | event-server |
event-store | host | logger | network-access | notification | sdee-server | transaction-server |
transaction-source | web-server] [clear] command to generate statistics for each of the sensor
applications.
The clear option is not available for the analysis engine, host, or network access applications.
Note
To display statistics for the sensor, follow these steps:
Log in to the CLI.
Step 1
Display the statistics for the virtual sensor:
Step 2
sensor# show statistics virtual-sensor
Virtual Sensor Statistics
Statistics for Virtual Sensor vs0
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
13-10
Number of exec Clear commands during uptime = 1
Denied Attackers and hit count for each.
10.20.2.5 = 0
10.20.5.2 = 0
Name of current Signature-Definition instance = sig0
Name of current Event-Action-Rules instance = rules0
List of interfaces monitored by this virtual sensor = fe0_1
General Statistics for this Virtual Sensor
Number of seconds since a reset of the statistics = 1675
Measure of the level of resource utilization = 0
Total packets processed since reset = 241
Total IP packets processed since reset = 12
Total packets that were not IP processed since reset = 229
Total TCP packets processed since reset = 0
Total UDP packets processed since reset = 0
Total ICMP packets processed since reset = 12
Total packets that were not TCP, UDP, or ICMP processed since reset = 0
Total ARP packets processed since reset = 0
Total ISL encapsulated packets processed since reset = 0
Total 802.1q encapsulated packets processed since reset = 0
Total packets with bad IP checksums processed since reset = 0
Total packets with bad layer 4 checksums processed since reset = 0
Total number of bytes processed since reset = 22513
The rate of packets per second since reset = 0
The rate of bytes per second since reset = 13
The average bytes per packet since reset = 93
Denied Address Information
Number of Active Denied Attackers = 0
Number of Denied Attackers Inserted = 0
Number of Denied Attackers Total Hits = 0
Number of times max-denied-attackers limited creation of new entry = 0
Number of exec Clear commands during uptime = 0
Chapter 13
Number of Active Denied Attackers
categories. It is important to know if the list has been cleared.
Administrative Tasks for the Sensor
and
Number of
78-16527-01