Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual page 213
Configuration guide
Hide thumbs
Also See for 4215 - Intrusion Detection Sys Sensor:
- Hardware installation manual (74 pages)
Table of Contents
Advertisement
Chapter 12
Working With Configuration Files
-----------------------------------------------
-----------------------------------------------
ntp-option
-----------------------------------------------
-----------------------------------------------
summertime-option
-----------------------------------------------
-----------------------------------------------
auto-upgrade-option
-----------------------------------------------
-----------------------------------------------
sensor(config-hos)# exit
sensor(config)# exit
sensor#
Display the current configuration of the service interface submode:
Step 6
sensor# configure terminal
sensor(config)# service interface
sensor(config-int)# show settings
physical-interfaces (min: 0, max: 999999999, current: 2)
-----------------------------------------------
-----------------------------------------------
78-16527-01
offset: 0 minutes default: 0
standard-time-zone-name: UTC default: UTC
disabled
-----------------------------------------------
-----------------------------------------------
disabled
-----------------------------------------------
-----------------------------------------------
disabled
-----------------------------------------------
-----------------------------------------------
<protected entry>
name: GigabitEthernet0/1
-----------------------------------------------
media-type: backplane <protected>
description: <defaulted>
admin-state: enabled <protected>
duplex: auto <protected>
speed: auto <protected>
alt-tcp-reset-interface
-----------------------------------------------
none
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
<protected entry>
name: GigabitEthernet0/0
-----------------------------------------------
media-type: tx <protected>
description: <defaulted>
admin-state: disabled <protected>
duplex: auto <defaulted>
speed: auto <defaulted>
alt-tcp-reset-interface
-----------------------------------------------
none
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
Displaying the Current Submode Configuration
12-5
Advertisement
Table of Contents
Troubleshooting
