Auto-Upgrade Command And Options - Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual

Configuring Automatic Upgrades
If the server supplies MS-DOS style directory listings, the sensor cannot parse the directory listing and
Note
does not know that there is a new update available.
To change Microsoft IIS to use UNIX-style directory listings, follow these steps:
Choose Start > Program Files > Administrative Tools.
Step 1
Click the Home Directory tab.
Step 2
Click the UNIX directory listings style radio button.
Step 3

Auto-upgrade Command and Options

Use the auto-upgrade-option enabled command in the service host submode to configure automatic
upgrades.
The following options apply:
•
•
•
•
•
•
•
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
17-6
default— Sets the value back to the system default setting.
directory— Directory where upgrade files are located on the file server.
A leading '/' indicates an absolute path.
file-copy-protocol— File copy protocol used to download files from the file server. The valid values
are ftp or scp.
Note If you use SCP, you must use the ssh host-key command to add the server to the SSH known
hosts list so the sensor can communicate with it through SSH. For the procedure, see
Hosts to the Known Hosts List, page
ip-address— IP address of the file server.
password— User password for authentication on the file server.
schedule-option—Schedules when automatic upgrades occur. Calendar scheduling starts upgrades
at specific times on specific days. Periodic scheduling starts upgrades at specific periodic intervals.
calendar-schedule—Configure the days of the week and times of day that automatic upgrades
–
will be performed.
days-of-week—Days of the week on which auto-upgrades will be performed. You can select
multiple days: sunday through saturday are the valid values.
no—Removes an entry or selection setting.
times-of-day—Times of day at which auto-upgrades will begin. You can select multiple times.
The valid value is hh:mm[:ss].
periodic-schedule—Configure the time that the first automatic upgrade should occur, and how
–
long to wait between automatic upgrades.
interval—The number of hours to wait between automatic upgrades. Valid values are 0 to 8760.
start-time—The time of day to start the first automatic upgrade. The valid value is hh:mm[:ss].
user-name—Username for authentication on the file server.
Chapter 17 Upgrading, Downgrading, and Installing System Images
4-31.
Adding
78-16527-01