Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual page 451

Appendix C Troubleshooting
-----------------------------------------------
sensor(config-log)#
For a list of what each zone name refers to, see
Change the severity level (debug, timing, warning, or error) for a particular zone:
Step 12
sensor(config-log)# zone-control IdsEventStore severity error
sensor(config-log)# show settings
master-control
-----------------------------------------------
-----------------------------------------------
zone-control (min: 0, max: 999999999, current: 14)
-----------------------------------------------
78-16527-01
severity: warning <defaulted>
<protected entry>
zone-name: MpInstaller
severity: warning <defaulted>
<protected entry>
zone-name: cmgr
severity: warning <defaulted>
<protected entry>
zone-name: cplane
severity: warning <defaulted>
<protected entry>
zone-name: csi
severity: warning <defaulted>
<protected entry>
zone-name: ctlTransSource
severity: warning <defaulted>
<protected entry>
zone-name: intfc
severity: warning <defaulted>
<protected entry>
zone-name: nac
severity: warning <defaulted>
<protected entry>
zone-name: sensorApp
severity: warning <defaulted>
<protected entry>
zone-name: tls
severity: warning <defaulted>
enable-debug: true default: false
individual-zone-control: true default: false
<protected entry>
zone-name: AuthenticationApp
severity: warning <defaulted>
<protected entry>
zone-name: Cid
severity: debug <defaulted>
<protected entry>
zone-name: Cli
severity: warning <defaulted>
<protected entry>
zone-name: IdapiCtlTrans
severity: warning <defaulted>
<protected entry>
zone-name: IdsEventStore
severity: error default: warning
<protected entry>
zone-name: MpInstaller
severity: warning <defaulted>
<protected entry>
zone-name: cmgr
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
Troubleshooting the 4200 Series Appliance
Zone Names, page C-27.
C-25