Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual page 242

Displaying Statistics
NetDevice
State
BlockEnable = true
NetDevice
NetDevice
NetDevice
NetDevice
NetDevice
BlockedAddr
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
13-16
InterfacePreBlock = Pre_Acl_Test
InterfacePostBlock = Post_Acl_Test
Type = CAT6000_VACL
IP = 10.89.150.138
NATAddr = 0.0.0.0
Communications = telnet
BlockInterface
InterfaceName = 502
InterfacePreBlock = Pre_Acl_Test
BlockInterface
InterfaceName = 507
InterfacePostBlock = Post_Acl_Test
IP = 10.89.150.171
AclSupport = Does not use ACLs
Version = 6.3
State = Active
Firewall-type = PIX
IP = 10.89.150.219
AclSupport = Does not use ACLs
Version = 7.0
State = Active
Firewall-type = ASA
IP = 10.89.150.250
AclSupport = Does not use ACLs
Version = 2.2
State = Active
Firewall-type = FWSM
IP = 10.89.150.158
AclSupport = uses Named ACLs
Version = 12.2
State = Active
IP = 10.89.150.138
AclSupport = Uses VACLs
Version = 8.4
State = Active
Host
IP = 22.33.4.5
Vlan =
ActualIp =
BlockMinutes =
Host
IP = 21.21.12.12
Vlan =
ActualIp =
BlockMinutes =
Host
IP = 122.122.33.4
Vlan =
ActualIp =
BlockMinutes = 60
MinutesRemaining = 24
Chapter 13 Administrative Tasks for the Sensor
78-16527-01