Filtering The Current Submode Configuration Output - Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual

Chapter 12 Working With Configuration Files
Filter the current configuration so that you exclude lines that contain a regular expression, for example,
Step 3
"service":
sensor# show configuration | exclude service
! ------------------------------
! Version 5.0(0.22)
! Current configuration last modified Fri Dec 17 21:38:23 2004
! ------------------------------
exit
! ------------------------------
exit
! ------------------------------
exit
! ------------------------------
network-settings
host-ip 10.89.130.108/23,10.89.130.1
host-name sensor
telnet-option enabled
access-list 0.0.0.0/0
exit
time-zone-settings
offset 0
standard-time-zone-name UTC
exit
exit
! ------------------------------
exit
! ------------------------------
--MORE--
Note
Step 4 Filter the current configuration so that you include lines that contain a regular expression, for example,
"service":
sensor# show configuration | include service
service analysis-engine
service authentication
service event-action-rules rules0
service host
service interface
service logger
service network-access
service notification
service signature-definition sig0
engine service-generic
service ssh-known-hosts
service trusted-certificates
service web-server
sensor#

Filtering the Current Submode Configuration Output

Use the show settings | [begin | exclude | include] keyword command in the submode you are interested
in to search or filter the output of the contents of the submode configuration.
78-16527-01
Press Ctrl-C to stop the output and return to the CLI prompt.
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
Filtering the Current Submode Configuration Output
12-11