Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual page 335

Chapter 17 Upgrading, Downgrading, and Installing System Images
View the maintenance partition host configuration:
Step 7
guest@idsm2.localdomain# show ip
IP address
Subnet Mask
IP Broadcast
DNS Name
Default Gateway : 10.89.149.126
Nameserver(s)
guest@idsm2.localdomain#
Step 8 Verify the image installed on the application partition:
guest@idsm2.localdomain# show images
Device name
-----------
Hard disk(hdd)
guest@idsm2.localdomain#
Step 9 Verify the maintenance partition version (including the BIOS version):
guest@idsm2.localdomain# show version
Maintenance image version: 2.1(2)
mp.2-1-2.bin : Thu Nov 18 11:41:36 PST 2004 :
integ@kplus-build-lx.cisco.com
Line Card Number :WS-SVC-IDSM2-XL
Number of Pentium-class Processors : 2
BIOS Vendor: Phoenix Technologies Ltd.
BIOS Version: 4.0-Rel 6.0.9
Total available memory: 2012 MB
Size of compact flash: 61 MB
Size of hard disk: 19077 MB
Daughter Card Info: Falcon rev 3, FW ver 2.0.3.0 (IDS), SRAM
guest@idsm2.localdomain#
Upgrade the application partition:
Step 10
guest@idsm2.localdomain# upgrade
ftp://jsmith@10.89.146.11//RELEASES/Latest/5.0-1/WS-SVC-IDSM2-K9-sys-1.1-a-5.0-1.bin.gz
Downloading the image. This may take several minutes...
Password for jsmith@10.89.146.114:
500 'SIZE WS-SVC-IDSM2-K9-sys-1.1-a-5.0-1.bin.gz': command not understood.
ftp://jsmith@10.89.146.11//RELEASES/Latest/5.0-1/WS-SVC-IDSM2-K9-sys-1.1-a-5.0-1.bin.gz
(unknown size)
/tmp/upgrade.gz
29303086 bytes transferred in 5.34 sec (5359.02k/sec)
Upgrade file
ftp://jsmith@10.89.146.114//RELEASES/Latest/5.0-1/WS-SVC-IDSM2-K9-sys-1.1-a-5.0-1.bin.gz
is downloaded.
Upgrading will wipe out the contents on the storage media.
Do you want to proceed installing it [y|N]:
Type
Step 11
y
Proceeding with upgrade. Please do not interrupt.
If the upgrade is interrupted or fails, boot into maintenance image again and restart
upgrade.
78-16527-01
: 10.89.149.74
: 255.255.255.128
: 10.255.255.255
: idsm2.localdomain
:
Partition#
----------
1
[|]
to proceed with the upgrade.
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
Image name
----------
5.0(1)
28616K
Installing System Images
8 MB, SDRAM 256 MB
17-33