Honeywell SV2 Series User Manual page 56

SV2 Series Safety Shut-off Valves
Pressure Module
Specifications
Fig. 24: Pressure Module.
Dimensions:
Refer to Fig. 25.
Models:
For detailed specifications, refer to Table 11.
PRESSMOD11-000
PRESSMOD12-000
PRESSMOD13-000
PRESSMOD14-000
PRESSMOD41-000
PRESSMOD42-000
PRESSMOD43-000
PRESSMOD44-000
Mounting:
Two (2) M4x25 Phillips head screws
Maximum tightening torque 2 ± 0.2 Nm (18 ± 2 in-lbf)
Environmental Ratings:
NEMA 1/IP20 or NEMA 4/IP66
Operating Temperature Range:
NEMA 1/IP20 versions: +5°F to 150°F / -15°C to 65°C
NEMA 4/IP66 with conduit connections versions: -40°F to 150°F / -40°C to 65°C
Approvals
The Pressure Module is not a stand-alone product and must be used with a SV2 Series valve and thus is specified as part of the
valve approvals.
Contact Ratings:
Contact wiring connections for the flame safeguard control interlock string are contained within the valve main electrical
enclosure. Refer to VALVE SPECIFICATIONS section of this manual for contact ratings and the BURNER CONTROL INTERFACE
WIRING section of this manual for proper wiring. The same information may be found in the SV2 Series safety shut-off valve
installation instructions, document 32-00018.
Maximum Inlet Pressure:
Valve inlet pressure must not exceed Pressure Module maximum pressure rating. Refer to Table 11.
Maximum Withstand Pressure:
Equals 150% of Pressure Module model maximum pressure rating.
56 32-00029—02