Honeywell SV2 Series User Manual page 151

2. Once the valve is repowered, there will be a FARMOD mismatch active fault present. Refer to
Fig. 130: Active faults with previously configured / used FARMOD.
3. Navigate to the Setup & Tests menu and select the Settings tile. See
Fig. 131: Setup & Tests menu.
4. Go to the FARMOD tab and Accept the attached used FARMOD by pressing the Accept button. Refer to
SV2 Series Safety Shut-off Valves
V2F, V2V
SV2 SERIES SAFETY SHUT-OFF VALVES USER MANUAL
Fig. 131.
151
Fig. 130.
Fig. 128-Fig. 129.