Table Of Contents - Honeywell SV2 Series User Manual

Fault Fault
Category Description
Lo-Gas pressure
lockout
Hi-Gas pressure
lockout
Lo-/Hi-Gas
Pressure
pressure not
Limits
configured
Pressure out of
range
SV2 Series Safety Shut-off Valves
V2F, V2V
Detailed Description
Low gas pressure below
threshold
High gas pressure above
threshold
Pressure Module not
configured for low and high
gas pressure functions
Pressure out of the allowed
Pressure Module range.
SV2 SERIES SAFETY SHUT-OFF VALVES USER MANUAL
Remediation Steps
1.) Reset valve and burner management
system, observing burner operation for
proper pressures.
2.) Adjust appliance regulator as
necessary.
3.) Recommission Low gas pressure
setting as necessary.
1.) Reset valve and burner management
system, observing burner operation for
proper pressures.
2.) Adjust appliance regulator as
necessary.
3.) Recommission High gas pressure
setting as necessary.
NOTE: Low and High gas pressure
settings must be configured before valve
will be operational
1.) Commission Low and High gas
pressure settings as necessary.
1.) Verify the Pressure Module rating is
correct for the application.
2.) If the pressure module is correct, reset
valve and burner management system,
observing burner operation for proper
pressures.
3.) Adjust appliance regulator as
necessary.
4.) If inlet pressure is higher than Pressure
Module rating, remove power and shut off
gas supply and replace Pressure Module
with higher rated model.
203
Comments Fault
#
20
21
Warning 22
indication
for SV2
Series
valve.
Warning 53
indication
for SV2
Series
valve.