Honeywell SV2 Series User Manual page 28

SV2 Series Safety Shut-off Valves
WARNING!
Explosion Hazard and Electrical Shock Hazard.
Can cause explosion, serious injury or death.
• Do not take valve apart.
• Do not use tools to operate valve.
• Do not use valve if it has been flooded.
• Call serviceman if valve does not work properly.
IMPORTANT
• Disassembly of the valve in the field may cause permanent damage to the valve and void the factory warranty.
• Fasteners containing lacquer paint indicate non-field accessible areas.
• Accessory modules may be removed or replaced as necessary in the field.
CAUTION
If valve has been dropped, do not use it.
• Dropping the valve may cause permanent damage to the valve.
• Replace entire valve and associated modules before use
Installation Quick Start Guide
The SV2 Series valve installation steps are illustrated below in the Quick Start Guide.
NOTE: Elaboration of each step is detailed in the SV2 Series Safety Shut-Off Valves Installation Instructions, document 32-
00018, which is shipped with each valve and available online.
CAUTION
The SV2 Series valve should be used with clean gas free of particles bigger than 50 micrometers. To ensure this
requirement is met, an external filter element, such as the Honeywell Kromschroeder GFK or similar, can be added to
the gas supply line.
28 32-00029—02