Honeywell SV2 Series User Manual page 139

Fig. 105: Valve Production Cloning configuration groups selection, with passwords, 'Valve Security' group not selected.
6. Select the 'Load to Valve' button. As the user interface is sending the selected configuration to the valve, the progress bar
pops up to show download progress. Refer to
Fig. 106: Load valve configuration progress bar.
7. Once the data is successfully sent and verified, the text 'Data sent successfully' is displayed at the top of the progress bar.
Refer to Fig. 107.
Fig. 107: Load valve configuration successful completion.
8. Select the 'OK' button
SV2 Series Safety Shut-off Valves
V2F, V2V
Fig.
(Fig. 107) to proceed to the 'Safety Parameters Verification' step (refer to
106.
139
SV2 SERIES SAFETY SHUT-OFF VALVES USER MANUAL
Fig. 108 and Fig. 109).