Honeywell SV2 Series User Manual page 120

SV2 Series Safety Shut-off Valves
Fig. 78: Installer Password Changed confirmation dialog box.
Installer Password Configuration by the Installer
1. Log in using the Installer password. The Installer can login by selecting the padlock symbol
the Security page. Refer to
2. Select Change Installer/OEM password button. Refer to
NOTE: When logged in as the Installer, the user can only change the Installer password, therefore the access selection at
the top of the Change Password dialog box is pre-selected as Installer.
3. Type in the current Installer Password (if it exists). Refer to
default Installer password is automatically filled in ('SV2InstallerKey2017').
Fig. 79: Change Installer as Installer password dialog box.
4. Enter the new Installer Password by selecting the blank field. When the keyboard pops up, enter the new Installer password
and select Save. Refer to
5. Confirm the new password by selecting the second blank field, entering the password and selecting save again.
6. When the Change Password dialog box reappears (refer to
Fig. 70.
Fig. 72.
Fig. 71. This will open the Change Password dialog box.
Fig. 79. When the Installer password is not configured, the
Fig. 80), select Change Password.
120
in the upper right corner on
32-00029—02