Honeywell SV2 Series User Manual page 116

SV2 Series Safety Shut-off Valves
Fig. 71: Change Installer/OEM password dialog box.
By selecting the button with the eye symbol, the obscured passwords will be visible. The Key button will not be used.
OEM Password Configuration
The OEM will need to configure their main password and their reset password if the 'Enable OEM Password Reset box is checked
on the Security page (refer to
NOTES:
• The OEM MAIN password should NOT be the same for all OEM valves/appliances in accordance with best practices.
• The OEM RESET password CAN be the same for all OEM valves/appliances. For security reasons, the OEM Reset
password should be more robust and longer than the OEM Main password.
• The OEM main and reset passwords CANNOT be the same.
• Do not print passwords in manuals for cyber security reasons.
The procedure to configure the OEM main password is as follows:
1. Select 'OEM' in the Change Installer/OEM password dialog box. Refer to
2. Type in the current OEM password (if it exists). When the OEM password is not configured, the default OEM password is
automatically filled in ('SV2OemKey2017').
3. Enter the new OEM Password by selecting the blank field. When the keyboard pops up, enter the new OEM password and
select Save. Refer to Fig.
Fig. 70). Both passwords should be kept in a secure, but accessible location.
72.
Fig. 71.
116 32-00029—02