Honeywell SV2 Series User Manual page 35

3. WIRING OVERVIEW
Introduction
Up to 5 connectors are required for customer field wiring (model dependent). Customers may purchase the Honeywell SV2
Series valves with or without the required customer wiring connectors (continent dependent).
If the valve is purchased with customer electrical connectors, they may be found in a bag assembly, housed in the accessory box
that contains the literature and spare screws for mounting the Pressure Module or C6097 pressure switches.
If the valve is not purchased with the required customer wiring connectors, all 5 may be purchased from Honeywell as a
bag assembly under part number CONNECTORKIT-000 or purchased externally. For purchasing externally, the appropriate
connector information is shown in
Table 6. SV2 Valve Electrical Connectors Identification.
Vendor Description
Lumberg RAST 5, 2 Pole
Lumberg RAST 5, 3 Pole
Lumberg RAST 5, 4 Pole
Lumberg RAST 5, 6 Pole
1. Does not apply to BASIC (5) electronics, designated by the 9th digit in the valve model number. Refer to
SV2 Series Safety Shut-off Valves
V2F, V2V
Table 6.
Vendor Part Number SV2 Series Valves Purpose
3611 02 K02M08 Mains supply
3611 03 K04M08 RS-485 Modbus
3611 04 K120M08 Analog Fire Rate + Analog O2 Sensor (future use)
3611 06 K01M08 Control Wiring
SV2 SERIES SAFETY SHUT-OFF VALVES USER MANUAL
1
Fig. 1. Valve nomenclature.
35
Required
Quantity
1
1
2
1
1