Honeywell SV2 Series User Manual page 142

SV2 Series Safety Shut-off Valves
Fig. 113: Valve Production cloning selection for configured valve.
4. Select the 'Valve Production Cloning' button.
Fig. 114: Valve Production Cloning screen.
5. On the 'Valve Production Cloning' screen that appears, log in under the OEM access level by selecting the padlock symbol
in the upper right hand corner of the page. Refer to
6. Select the appropriate valve configuration to load to the valve by pressing the 'Open' button beside it (Refer to
configuration cloning groups page will pop up.
a. The page look and next steps will depend on whether passwords have not been assigned (Refer to
assigned (Refer to
Valve Configuration Without Passwords
The steps for selecting and uploading the valve configuration groups without and with passwords is the same with one
exception; the user does not need to fill in the OEM password if passwords have not been assigned. Refer to
Fig. 117).
Fig. 114.
142
Fig. 114). The
Fig. 116) or have been
Fig. 115.
32-00029—02