Honeywell SV2 Series User Manual page 134

SV2 Series Safety Shut-off Valves
Fig. 98: Valve Production cloning configuration groups selection.
Table 24. Valve configuration groups.
Category Contents
Valve Body
Valve General
Access Levels
Valve Security
General
Remote Reset
POC (Proof of Closure)
PRESSMOD General
PRESSMOD
(Pressure
Module)
Description
• Valve body size + Access Level
• Valve Name + Access Level
• Modbus Address + Access Level
• Baud Rate + Access Level
• LED Indication (for electronics side change) + Access Level
• Applicable Access Levels noted in each section of this table
• Installer Security:
– Access Level of Installer password configuration (whom is
allowed to assign this password)
• Enable/Disable password reset functionality:
– Installer (Access Level is set to OEM and cannot be
changed)
– OEM (Access Level is set to OEM and cannot be changed)
• Main passwords:
– OEM (optional)
– Installer (optional)
• OEM Reset password (optional) (can only be configured and
cloned when OEM Password Reset functionality is Enabled)
• Access Level for Remote Reset via user interface
• Access Level of POC 1 and POC 2 Setup (configuration
acceptance)
– A new valve or newly re-connected POC sensor(s) have to be
accepted manually on the Setup & Tests / Settings / POC
page
• Access Level of PRESSMOD field replacement (whom is
allowed to perform)
– A new connected PRESSMOD has to be accepted manually
on the Setup & Tests / Settings / PRESSMOD page
134 32-00029—02