Honeywell SV2 Series User Manual page 137

Fig. 101: Valve Production Cloning screen.
4. Select the appropriate valve configuration to load to the valve by pressing the 'Open' button beside it (Refer to
configuration cloning groups page will pop up.
a. The page look and next steps will depend on whether passwords have not been assigned (Refer to
assigned (Refer to
Valve Configuration Without Passwords
The steps for selecting and uploading the valve configuration groups without and with passwords is the same with one
exception; the user does not need to fill in the OEM password if passwords have not been assigned. Refer to
Fig. 102: Valve Production Cloning configuration groups selection, without passwords.
SV2 Series Safety Shut-off Valves
V2F, V2V
Fig. 103).
SV2 SERIES SAFETY SHUT-OFF VALVES USER MANUAL
137
Fig. 101). The
Fig. 102) or have been
Fig. 102.