Honeywell SV2 Series User Manual page 123

Fig. 83: Change OEM Reset Password dialog box.
3. Type in the current OEM main password in the top box. When OEM password is not configured, the default OEM password
is automatically filled in ('SV2OemKey2017').
4. Enter the new OEM Reset Password by selecting the blank field. When the keyboard pops up, enter the new password and
select Save. Refer to Fig.
5. Confirm the new password by selecting the second blank field, entering the password and selecting Save again.
6. When the Change OEM Reset Password dialog box reappears (refer to
Fig. 84: Change OEM Reset Password dialog box with entered password.
7. When the OEM Reset Password has been changed, the acknowledgement dialog box will appear. Refer to
to exit this mode.
SV2 Series Safety Shut-off Valves
V2F, V2V
72.
SV2 SERIES SAFETY SHUT-OFF VALVES USER MANUAL
Fig. 84), select Change Password.
123
Fig. 85. Select OK