Honeywell SV2 Series User Manual page 118

SV2 Series Safety Shut-off Valves
Fig. 74: OEM Password Changed confirmation dialog box.
7. It is recommended to select Yes on the Password Changed dialog box, which will bring the user back to the Security page
(refer to Fig. 70).
a. The user can then log in with the newly created OEM password (see next step).
b. If No is selected, the Password Changed confirmation dialog box will close and the user will stay logged in with the old
password, with the Change Password dialog box open (refer to
8. Log in using the newly created OEM password by selecting the padlock symbol
Security page. Refer to
a. Enter the new password by selecting the blank field and entering it when the keyboard pops up. Refer to
b. Select Login to log in with the new password.
Fig. 75: Login dialog box.
Installer Password Configuration
When configuring the Installer main password, there some differences between when the user is logged in as the OEM or as the
Installer as detailed below.
Fig. 70.
Fig. 73).
in the upper right hand corner of the
118
Fig. 75.
32-00029—02