Honeywell SV2 Series User Manual page 119

Installer Password Configuration by the OEM
1. Log in using the OEM password. The OEM can login by selecting the padlock symbol
Security page. Refer to
2. Select Change Installer/OEM password button. Refer to
Fig. 76.
3. Select 'Installer' in the dialog box.
Fig. 76: Change Installer password as OEM dialog box.
4. Type in the current OEM Password (if it exists). When the OEM password is not configured, the default OEM password is
automatically filled in ('SV2OemKey2017').
5. Enter the new Installer Password by selecting the blank field. When the keyboard pops up, enter the new Installer password
and select Save. Refer to
6. Confirm the new password by selecting the second blank field, entering the password and selecting save again.
7. When the Change Password dialog box reappears (refer to
Fig. 77: Change Installer password as OEM dialog box with entered password.
8. When the Installer password is changed, the Password Changed dialog box opens. Select the OK button to proceed. Refer
to Fig. 78.
SV2 Series Safety Shut-off Valves
V2F, V2V
Fig. 70.
Fig. 72.
SV2 SERIES SAFETY SHUT-OFF VALVES USER MANUAL
Fig. 70. This will open the Change Password dialog box. Refer to
Fig. 77), select Change Password.
119
in the upper right corner on the