Chapter 7
Card Provisioning
Figure 7-1
Depending on the setting you need to modify, click the Line, Line Threshold, Electric Path Threshold,
Step 3
Sonet Path Threshold, or Alarming subtab.
Note
Modify the settings shown in
Step 4
For numerics, double-click the field and type the new number.
June 2002
Provisioning line parameters on the DS1-14 card
See
Chapter 10, "Alarm Monitoring and Management"
Behavior tab.
Table 7-3 on page
for information about the Alarm
7-6. For drop-down lists, select an item from the list.
Cisco ONS 15327 User Documentation, R3.3
Provisioning Electrical Cards
7-5