Cisco ONS 15327 User Documentation page 55

Chapter 1 Hardware Installation
1.3.1 Reversible Mounting Bracket
Use only the fastening hardware provided with the ONS 15327 to prevent loosening, deterioration, and
Caution
electromechanical corrosion of the hardware and joined material.
When mounting the ONS 15327 in a frame with a non-conductive coating (such as paint, lacquer, or
Caution
enamel) use either the thread-forming screws provided with the ONS 15327 shipping kit or remove the
coating from the threads to ensure electrical continuity.
The shelf assembly comes with mounting brackets that can be reversed for use with a 19- or 23-inch rack.
The following steps describe how to reverse the shelf assembly mounting bracket to fit a 19- inch rack.
Procedure: Reverse the Mounting Bracket to Fit a 19-Inch Rack
Remove the screws that attach the mounting bracket to the side of the shelf assembly.
Step 1
Step 2 Flip the detached mounting bracket upside down. Text imprinted on the mounting bracket will now also
be upside down.
Step 3 Place the wider side of the mounting bracket flush against the shelf assembly (see
The narrower side of the mounting bracket should be towards the front of the shelf assembly. Text
imprinted on the mounting bracket should be visible and upside down.
Align the mounting bracket screw holes against the shelf assembly screw holes.
Step 4
Insert the screws that were removed in Step 1 and tighten them.
Step 5
Repeat the procedure for the mounting bracket on the opposite side.
Step 6
June 2002
Cisco ONS 15327 User Documentation, R3.3
Rack Installation
Figure 1-2).
1-5