Viewing Ctc Software Versions; Figure 3-6 Displaying Ons 15327 Hardware Information - Cisco ONS 15327 User Documentation

Chapter 3 Node Setup
Figure 3-6
The Inventory tab displays the following information about the cards installed in the ONS 15327:
•
•
•
You can pre-provision a slot before the card is installed by right-clicking the slot in node view and
Tip
selecting a card type.
•
•
•
•
•

3.8 Viewing CTC Software Versions

CTC software is pre-loaded on the ONS 15327 XTC cards; therefore, you do not need to install software
on the XTC. When a new CTC software version is released, you must follow procedures provided by the
Cisco Technical Assistance Center (TAC) to upgrade the ONS 15327 software.
June 2002
Displaying ONS 15327 hardware information
Location—The slot where the card is installed
Eqpt Type—Equipment type the slot is provisioned for, for example, OC-12 or XTC
Actual Eqpt Type—The actual card that is installed in the slot, for example, OC12 IR or XTC-28-3
HW Part #—Card part number; this number is printed on the top of the card
HW Rev—Card revision number
Serial #—Card serial number; this number is unique to each card
CLEI Code—Common Language Equipment Identifier code
Firmware Rev—Revision number of the software used by the ASIC chip installed on the card
Viewing CTC Software Versions
Cisco ONS 15327 User Documentation, R3.3
3-17