Cisco ONS 15327 User Documentation page 95

Hide thumbs Also See for ONS 15327:
Table of Contents

Advertisement

Chapter 2
Software Installation
Table 2-5
Set Up Windows PC for Craft ONS 15327 Connections on the Same Subnet Using Static IP Addresses
For Windows 95/98:
From the Windows Start menu,
1.
choose Settings > Control Panel.
On the Control Panel dialog box,
2.
click the Network icon.
In the Network dialog box select
3.
TCP/IP for your PC Ethernet card,
then click Properties.
On the TCP/IP Properties dialog
4.
box, click the DNS Configuration
tab and choose Disable DNS.
5.
Click the WINS Configuration tab
and choose Disable WINS
Resolution.
Click the IP Address tab.
6.
In the IP Address window, click
7.
Specify an IP address.
In the IP Address field, enter an IP
8.
address that is identical to the ONS
15327 IP address except for the last
three digits. The last three digits
must be between 1 and 254.
In the Subnet Mask field, type
9.
255.255.255.0.
Click OK.
10.
On the TCP/IP dialog box, click the
11.
Gateway tab.
In the New Gateway field, type the
12.
ONS 15327 IP address. Click Add.
Verify that the IP address displays
13.
in the Installed Gateways field,
then click OK.
When the prompt to restart your PC
14.
displays, click Yes.
After you set up your PC, go to the
Step 3
the ONS 15327.
June 2002
For Windows NT:
From the Windows Start menu,
1.
choose Settings > Control Panel.
On the Control Panel dialog box,
2.
click the Network icon.
In the Network dialog box click the
3.
Protocols tab, choose TCP/IP
Protocol, then click Properties.
Click the IP Address tab.
4.
In the IP Address window, click
5.
Specify an IP address.
6.
In the IP Address field, enter an IP
address that is identical to the ONS
15327 IP address except for the last
three digits. The last three digits
must be between 1 and 254.
In the Subnet Mask field, type
7.
255.255.255.0.
Click the Advanced button.
8.
Under the Gateways List, click
9.
Add. The TCP/IP Gateway
Address dialog box is displayed.
Type the ONS 15327 IP address in
10.
the Gateway Address field.
Click Add.
11.
Click OK.
12.
Click Apply.
13.
14.
In some cases, Windows NT will
prompt you to reboot your PC. If
you receive this prompt, click Yes.
"Logging into the ONS 15327" procedure on page 2-24
Running the CTC Installation Wizard
For Windows 2000:
From the Windows Start menu,
1.
choose Settings > Network and
Dial-up Connections > Local Area
Connection.
2.
On the Local Area Connection
Status dialog box, click Properties.
3.
On the General tab, choose Internet
Protocol (TCP/IP), then click
Properties.
4.
Click Use the following IP address.
5.
In the IP Address field, enter an IP
address that is identical to the ONS
15327 IP address except for the last
three digits. The last three digits
must be between 1 and 254.
In the Subnet Mask field, type
6.
255.255.255.0.
In the Default Gateway field, type
7.
the ONS 15327 IP address.
Click OK.
8.
On the Local Area Connection
9.
Status dialog box, click Close.
On the Local Area Connection
10.
Properties dialog box, click OK.
Cisco ONS 15327 User Documentation
to log into
2-13

Advertisement

Table of Contents
loading

Table of Contents