Cisco ONS 15327 User Documentation page 97

Chapter 2 Software Installation
After you set up your PC, go to the
Step 3
the ONS 15327.
Procedure: Set Up a Windows PC for Craft Connection to an ONS 15327 Using Automatic Host
Detection
Use this procedure to set up your computer for local craft connection to the ONS 15327 when:
•
•
•
You do not need to access a corporate LAN or use non-ONS 15327 applications such as ping and trace
route.
This procedure employs the ONS 15327 automatic host detection to allow you to directly connect to
Note
multiple ONS 15327s successively without reconfiguring your computer's IP address. However, if proxy
server is not enabled on the ONS 15327, DCC-connected nodes on different subnets will not be visible.
Verify the operating system that is installed on your computer:
Step 1
a.
b.
c.
Step 2 Complete the steps in
June 2002
You are connecting to a node that resides in a secure network employing the ONS 15327 proxy
server.
All nodes that you will access are running software release Release 3.3.
You will connect to multiple ONS 15327s.
From the Windows Start menu, choose Settings > Control Panel.
On the Control Panel window, double-click the System icon.
On the General tab of the System Settings window, verify that the Windows operating system is one
of the following: Windows 95, Windows 98, Windows 2000, or Windows NT 4.0
Table 2-7
"Logging into the ONS 15327" procedure on page 2-24
for the operating system installed on your PC.
Running the CTC Installation Wizard
Cisco ONS 15327 User Documentation
to log into
2-15