Performance Monitoring for Electrical Cards
8.4 Performance Monitoring for Electrical Cards
The following sections define performance monitoring parameters for the XTC DS1 and XTC DS3
electrical cards.
8.4.1 XTC DS1 Performance Monitoring Parameters
Figure 8-11
monitoring is supported for the DS1 card. Far-end DS1 path-performance monitoring is not supported
for the DS1 card.
monitoring parameters for the DS1 cards.
Figure 8-11 Monitored signal types for the XTC DS1 cards
ONS 15327
Note
The XX in the illustration above represents all PMs listed below with the given prefix and/or suffix.
Cisco ONS 15327 User Documentation, R3.3
8-16
shows the signal types that support far-end PMs. Far-end VT and STS path-performance
Figure 8-12
shows where overhead bytes detected on the ASICs produce performance
Near End
DS1 Signal
DS1
OC48
DS1 Path (DS1 XX) Far End PMs Not Supported
VT Path (XX-V) Far End PMs Supported
Fiber
OC48
Chapter 8
Performance Monitoring
Far End
DS1 Signal
ONS 15327
DS1
June 2002