Card Performance Monitoring Parameters; Figure 8-18 Monitored Signal Types For The Oc-48 Cards - Cisco ONS 15327 User Documentation

Hide thumbs Also See for ONS 15327:

Table of Contents

Performance Monitoring

Table 8-22 Far-End Line Layer PMs for the OC-12 Card (continued)

8.5.3 OC-48 Card Performance Monitoring Parameters

detected on the ASICs produce performance monitoring parameters for the OC-48 cards.

PMs on the protect STS are not supported for BLSR. The XX in the illustration above represents all PMs

listed below with the given prefix and/or suffix.

UAS-L is a count of the seconds when the line is considered unavailable

at the far end. A line is considered unavailable at the onset of ten

consecutive seconds that qualify as SES-LFEs, and continues to be

unavailable until the onset of ten consecutive seconds that do not qualify

as SES-LFEs.

FC-L is a count of the number of far-end line failure events. A failure

event begins when RFI-L failure is declared and ends when the RFI-L

failure clears. A failure event that begins in one period and ends in another

period is counted only in the period where it began.

shows the signal types that support far-end PMs.

Performance Monitoring for Optical Cards

Cisco ONS 15327 User Documentation, R3.3

shows where overhead bytes