Cisco ONS 15327 User Documentation page 86

Running the CTC Installation Wizard
2.3 Running the CTC Installation Wizard
The ONS 15327 provides a setup wizard that installs the files needed to run CTC on PCs and Solaris
workstations. You can run the setup wizard from the Cisco ONS 15327 software CD or from the Cisco
ONS 15327 documentation CD. The wizard will install:
•
•
•
•
For Solaris workstations, the JRE may require patches to run properly. You can find the patch tar file in
the Jre/Solaris directory on the CD. For information about installing the patches, see the
Jre/Solaris/Solaris.txt file on the CD. After installing the patches, if necessary, perform the
Java Runtime Environment for UNIX" procedure on page 2-8
Procedure: Run the CTC Installation Wizard for Windows
Step 1 Verify that your computer has the following:
•
•
•
•
Note
Insert the Cisco ONS 15327 Release 3.3 software or documentation CD into your computer CD drive.
Step 2
The installation program begins running automatically. If it does not start, navigate to your computer's
CD directory and double-click setup.exe.
The Cisco Transport Controller Installation Wizard displays the components that will be installed on
your computer
Cisco ONS 15327 User Documentation
2-4
Netscape Communicator 4.73 (Windows) or 4.76 (Solaris)
JRE 1.3.1_02 (Windows and Solaris)
Cisco ONS 15327 CTC online help
Modified java.policy file
Processor—Pentium II, 300 Mhz or faster
RAM—128 MB
Hard drive—2 GB is recommended. 50 MB of space must be available.
Operating System—Windows 95, Windows 98, Windows NT 4.0, or Windows 2000
These requirements are guidelines. CTC performance will be faster if your computer has a faster
processor and more RAM.
(Figure 2-1).
Chapter 2 Software Installation
to set up JRE on the workstation.
"Set Up the
June 2002