Vlan Membership; Figure 9-22 Configuring Vlan Membership For Individual Ethernet Ports - Cisco ONS 15327 User Documentation

Hide thumbs Also See for ONS 15327:
Table of Contents

Advertisement

Chapter 9
Ethernet Operation

9.5.3 VLAN Membership

This section explains how to provision Ethernet ports for VLAN membership. For initial port
provisioning (before provisioning VLAN membership), see the
section on page
ONS 15327s propagate VLANs whenever a node appears on the same network view of another node
Caution
regardless of whether the nodes connect through DCC. For example, if two ONS 15327s without DCC
connectivity belong to the same Login Node Group, then whenever CTC gets launched from within this
login node group, VLANs propagate from one to another. This happens even though the ONS 15327s do
not belong to the same SONET ring.
The ONS 15327 allows you to configure the VLAN membership and Q-tag handling of individual
Ethernet ports.
Procedure: Provision Ethernet Ports for VLAN Membership
Step 1
Display the CTC card view for the Ethernet card.
Step 2
Click the Provisioning > VLAN tabs

Figure 9-22 Configuring VLAN membership for individual Ethernet ports

June 2002
9-3.
(Figure
"E10/100-4 Card Port Provisioning"
9-22).
Cisco ONS 15327 User Documentation, R3.3
VLAN Support
9-25

Advertisement

Table of Contents
loading

Table of Contents