Fe-Ds1-Multlos; Fe-Ds1-Sngllos - Cisco ONS 15327 User Documentation
Hide thumbs
Also See for ONS 15327:
- Procedure manual (478 pages) ,
- Manual (42 pages) ,
- Reference manual (166 pages)
Table of Contents
Advertisement
Chapter 14
Alarm Troubleshooting
Procedure: Clear the FE-AIS Condition on the XTC-28-3 Cards in C-bit Format
To troubleshoot an FE alarm, determine which node and card link directly to the card reporting the FE
Step 1
alarm.
Login to the node that links directly to the card reporting the FE alarm.
Step 2
Clear the main alarm.
Step 3
14.4.49 FE-DS1-MULTLOS
•
The far end multiple DS-1 LOS detected on XTC-14 or XTC-28-3 (FE-DS1-MULTLOS) condition
means multiple inputs detect a loss on the far end. The prefix FE in an alarm/condition message means
the main alarm is occurring at the far-end node and not at the node reporting the FE-DS1-MULTOS
alarm. Troubleshoot the FE alarm/condition by troubleshooting the main alarm at its source. Both
alarm/conditions clear when the main alarm clears.
Procedure: Clear the FE-DS1-MULTLOS Condition on the XTC-14 Card or XTC-28-3 Card
To troubleshoot an FE condition/alarm, determine which node and card link directly to the card reporting
Step 1
the FE alarm.
Login to the node that links directly to the card reporting the FE condition/alarm.
Step 2
Look up and troubleshoot the main alarm.
Step 3
14.4.50 FE-DS1-SNGLLOS
•
The far end single DS-1 LOS on the XTC-14 (FE-DS1-SNGLLOS) condition means one of the XTC
inputs on the far end detects an LOS. The prefix FE in an alarm/condition means the main alarm is
occurring at the far-end node and not at the node reporting this FE-EQPT-FAILSA alarm. Troubleshoot
the FE alarm by troubleshooting the main alarm at its source. Both alarm/conditions clear when the main
alarm clears.
Procedure: Clear the FE-DS1-SNGLLOS Condition on the XTC-14
To troubleshoot an FE alarm/condition, determine which node and card link directly to the card reporting
Step 1
the FE alarm.
Login to the node that links directly to the card reporting the FE alarm.
Step 2
Look up and troubleshoot the main alarm.
Step 3
June 2002
Not Alarmed (NA) (Condition)
Not Alarmed (NA) (Condition)
Cisco ONS 15327 User Documentation, R3.3
Alarm Procedures
14-41
Advertisement
Table of Contents
