Cisco ONS 15327 User Documentation page 415

Chapter 14 Alarm Troubleshooting
Table 14-2 Alarm Index by Alarm Type (continued)
STSTRM::TIM-P, page 14-82
STSTRM::UNEQ-P, page 14-84
VT-MON::AIS-V, page 14-10
VT-MON::AUTOSW-AIS, page 14-16
VT-MON::AUTOSW-LOP (STSMON), page 14-16
VT-MON::AUTOSW-PDI, page 14-17
VT-MON::AUTOSW-SDBER, page 14-17
VT-MON::AUTOSW-SFBER, page 14-17
VT-MON::AUTOSW-UNEQ (STSMON), page 14-17
VT-MON::FORCED-REQ, page 14-44
VT-MON::LOCKOUT-REQ, page 14-49
VT-MON::LOP-V, page 14-55
VT-MON::UNEQ-V, page 14-85
VT-TERM::AIS-V, page 14-10
VT-TERM::LOP-V, page 14-55
VT-TERM::PLM-V, page 14-68
VT-TERM::RFI-V, page 14-71
VT-TERM::SD-P, page 14-73
VT-TERM::SF-P, page 14-75
VT-TERM::UNEQ-V, page 14-85
14.2.1 Alarm Type/Object Definition
Table 14-3
Table 14-3 Alarm Type/Object Definition
AIP
BITS
BPLANE
DS1
DS3
E100T
ENVALRM
EQPT
EXT-SREF
FAN
NE
June 2002
defines alarm types.
Auxiliary interface protection module.
Building integration timing supply (BITS) incoming references (BITS-1, BITS-2).
The backplane.
1
DS-1 line on an XTC-14 card or XTC-28-3 card.
2
DS-3 line on an XTC-28-3 card.
Ethernet line on an E10/100 card.
Environmental alarm port on an MIC card.
Card in any of the 17 card slots. This object is used for alarms that refer to the card
itself and all other objects on the card including ports, lines, STS
BITS outgoing references (SYNC-BITS1, SYNC-BITS2).
Fan-tray assembly.
The entire network element (SYSTEM).
Alarm Index by Alarm Type
3
and VT
Cisco ONS 15327 User Documentation, R3.3
4
.
14-7