Table 2-7 Set Up Windows Pc For Craft Ons 15327 Connections Using Automatic Host Detection - Cisco ONS 15327 User Documentation

Running the CTC Installation Wizard
Table 2-7 Set Up Windows PC for Craft ONS 15327 Connections Using Automatic Host Detection
For Windows 95/98:
From the Windows Start menu,
1.
choose Settings > Control Panel.
On the Control Panel dialog box,
2.
click the Network icon.
In the Network dialog box select
3.
TCP/IP for your PC Ethernet card,
then click Properties.
On the TCP/IP Properties dialog
4.
box, click the DNS Configuration
tab and choose Disable DNS.
5. Click the WINS Configuration tab
and choose Disable WINS
Resolution.
Click the IP Address tab.
6.
In the IP Address window, click
7.
Specify an IP address.
In the IP Address field, enter a
8.
legitimate IP address.
In the Subnet Mask field, type
9.
255.255.255.0.
10. Click OK.
11. On the TCP/IP dialog box, click the
Gateway tab.
In the New Gateway field, type PC
12.
IP address (the address entered in
Step 8). Click Add.
Verify that the IP address displays
13.
in the Installed Gateways field,
then click OK.
When the prompt to restart your PC
14.
displays, click Yes.
Step 3 After you set up your PC, you can go to the
log into the ONS 15327.
Cisco ONS 15327 User Documentation
2-16
For Windows NT:
From the Windows Start menu,
1.
choose Settings > Control Panel.
On the Control Panel dialog box,
2.
click the Network icon.
In the Network dialog box click the
3.
Protocols tab, choose TCP/IP
Protocol, then click Properties.
Click the IP Address tab.
4.
In the IP Address window, click
5.
Specify an IP address.
6. In the IP Address field, enter a
legitimate IP address.
7. In the Subnet Mask field, type
255.255.255.0.
Click the Advanced button.
8.
Under the Gateways List, click
9.
Add. The TCP/IP Gateway
Address dialog box is displayed.
Type the IP address entered in
10.
Step 6 in the Gateway Address
field.
11. Click Add.
Click OK.
12.
13. Click Apply.
In some cases, Windows NT will
14.
prompt you to reboot your PC. If
you receive this prompt, click Yes.
"Logging into the ONS 15327" procedure on page 2-24
Chapter 2 Software Installation
For Windows 2000:
From the Windows Start menu,
1.
choose Settings > Network and
Dial-up Connections > Local Area
Connection.
2. On the Local Area Connection
Status dialog box, click Properties.
3. On the General tab, choose Internet
Protocol (TCP/IP), then click
Properties.
4. Click Use the following IP address.
5. In the IP Address field, enter a
legitimate IP address.
In the Subnet Mask field, type
6.
255.255.255.0.
Type the IP address entered in
7.
Step 5 in the Gateway Address field.
Click OK.
8.
9. On the Local Area Connection
Status dialog box, click Close.
10. On the Local Area Connection
Properties dialog box, click OK.
to
June 2002