Creating A Profile; Advanced Profile Configuration - Honeywell Thor VM3 Manual

If logged on as admin, tap on any network in the list to create a profile for that network.

Creating a Profile

To create from the Profile list:
1. Log in as admin.
2. Tap the New button.
3. Select the desired profile type - auto connect, manual connect or Ad Hoc.
4. Enter a profile name and network name.
5. Tap Next.
6. Tap Connect To... to connect to the network or tap Change connection settings for additional configuration options
including Security (page 6-7).
To create a profile from the nearby networks:
1. Log in as admin.
2. Tap the Browse nearby wireless networks button.
3. Tap the desired network then tap the Connect icon or double tap the desired network.
4. Change the profile name if desired.
5. Tap Advanced security settings for additional configuration options including
6. Tap OK to exit and save the profile or type Cancel to exit without creating a profile.

Advanced Profile Configuration

Connection
This tab shows the basic information used to create the profile.
Options include:
Security (page 6-7).
6 - 5