Select Wireless Security As Your Security Choice; Select A Wireless Security Profile - Honeywell Thor CV41 User Manual

1. Make sure the communications and radio parameters on your computer are config-
2. Tap Start > Network Connections. The Network Connections screen appears.
3. Tap and hold onto the Wireless Network Connection icon until the pop-up screen
4. Tap the Wireless Networks tab.
5. Make sure your wireless network you are configuring is selected and tap the
6. For Network Authentication, choose Open.
7. For Data Encryption, choose Disabled.
8. Tap OK. Your settings are saved.

Select Wireless Security as Your Security Choice

Microsoft security is enabled by default. To use Wireless scurity, you need to select it as
your security choice to use it. After you select Wireless security as your security choice,
you will be prompted to save your settings and reset the computer for your changes to
take effect.
Select Wireless Security
Use the following procedure to select Wireless security.
1. Start Intermec Settings. For help, see
2. Choose Communications > 802.11 Radio > Security Choice.
3. From the Security Choice list, select Wireless Security. An alert box appears telling
4. Tap Yes. The computer resets and starts with Microsoft Security as the Security

Select a Wireless Security Profile

You can define up to four profiles for Wireless security. Different profiles let your com-
puter communicate in different networks without having to change all of your security
settings. For example, you may want to set up one profile for the manufacturing floor
and one for the warehouse. By default, the active profile is Profile 1.
Select a Wireless Security Profile
Use the following procedure to select a WirelessWireless security profile.
1. Start Intermec Settings.
2. Choose Communications > 802.11 Radio > Wireless Security.
3. Choose a profile. A list of configurable settings appears.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
ured.
appears and select Properties.
Properties button.
you that you must save your settings and reboot the computer for the new security
choice to take effect.
Choice.
Start Intermec Settings.
51