Thor Vm3 Recovery Dvd; Thor Vm3 Drivers Dvd - Honeywell Thor VM3 Manual

Thor VM3 Recovery DVD

A recovery DVD is available to restore the operating system on your Thor VM3 to the same state it had when it was shipped
from the factory. The recovery DVD may not reload all factory installed software, but the

Thor VM3 Drivers DVD

(page 5-45) can
be used to install software applications. Recovery DVDs are available for English and Simplified Chinese.
Contact Technical Assistance (page 9-1) for information on the recovery DVD and for assistance installing other factory loaded
software.
To use the recovery DVD:
1. Attach a USB DVD drive and an external keyboard to the Thor VM3.
2. Insert the recovery DVD into the DVD drive.
3. Reboot the Thor VM3.
4. Repeatedly press the P5 key on the Thor VM3 front panel or the F5 key on the external keyboard.
5. When the Boot Menu is displayed, use the arrow keys on the external keyboard to select the USB DVD drive.
6. Follow the on-screen instructions to complete the recovery process.
7. When the process is complete, disconnect the USB DVD drive and start the Thor VM3.
Thor VM3 Drivers DVD
The drivers DVD contains drivers and software for the Thor VM3. The contents of the recovery DVD are divided by operating
system type:
• Use the contents of the Win7x86 folder for drivers for a 32-bit Windows 7 operating system.
• Use the contents of the Win7x64 folder for drivers for a 64-bit Windows 7 operating system.
• Use the contents of the WIN10 folder for drivers for a 64-bit Windows 10 operating system.
Inside the appropriate folder is a Microsoft Word document, UserGuide.docx, detailing the installation process. Install the driv-
ers in the order listed in this document, rebooting when specified.
5 - 45