Changing The Screen - Yamaha TS-S User Manual

9.3
Press the ▲ button or ▼ button on the TS-Monitor to change the TS-Monitor screen as follows.
5
The TS-Monitor always monitors the alarm (error alarm or warning alarm). If the TS-Monitor detects an alarm,
the screen will change to the MAIN screen. At this time, if any alarm has already occurred, the screen does not
change to the MAIN screen.
Additionally, if an error alarm occurs, the screen color will change. For details, see section 9.5, "Screen color
in case of alarm".
When turning on the power while holding down the ▼ button, the SETUP screen will start up. On the SETUP
screen, you can make the LCD setting. For details, see section 9.6, "SETUP screen".
When the SETUP screen is displayed, press the ▼ button while holding down the ▲ button. The screen will
then return to the normal startup screen.
5-52
Changing the screen
Changing the screen after normal startup
Transits after a certain
period of time has elapsed.
INFORMATION
screen
button
(or transits after a
certain period of
time has elapsed.) button
MAIN screen
button button
I/O screen
Changing the SETUP screen
Press the
at the same time
Subsequently, transits to
normal screen operation.
Press the
at the same time
Startup screen
button
button
Transits to
Alarm occurs.
the MAIN
screen.
button
button
Power on
button
Startup screen
button
and buttons
SETUP screen
button
and buttons
LCD SETUP
CHECK screen
button button
RUN screen
button button
STATUS screen
Press the and buttons
at the same time
button
COM SETUP
23505-M1-00
23506-M1-00