Class-Map Type Qos - Cisco Nexus 7000 Series Command Reference Manual

class-map
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
Usage Guidelines You cannot delete the system-defined queuing class map names. For more information about the
class-map command, see the Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide,
Release 5.x.
When you configure match all for a qos class map by entering the class-map type qos match-all
Note
command, the match-all option does not work. Instead, the match criteria is always treated as match any.
This command does not require a license.
Examples This example shows how to create or modify a qos class map:
switch(config)# class-map my_class1
switch(config-cmap-qos)#
This example shows how to remove a qos class map:
switch(config)# no class-map my_class1
switch(config)#
This example shows how to modify a qos color class map:
switch(config)# class-map conform-color-in
switch(config-color-map)#
Related Commands Command
show class-map qos
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-14
Description
Displays class maps.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
OL-23378-01