Voice-Vlan Oui - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

voice-vlan oui

voice-vlan oui MAC-ADDRESS MASK [description TEXT]
no voice-vlan oui MAC-ADDRESS MASK
Syntax Description
MAC-ADDRESS
MASK
description
TEXT
Default
Command Mode
Usage Guideline
Example
CLI Reference Guide
Use the command to add the user defined OUI of voice device. Use no form of
this command to delete the user defined OUI of voice device.
Specify the OUI MAC address.
Specify the OUI MAC address mask.
(Optional) The description of the user defined OUI.
(Optional) Specify the description of user defined OUI, an ASCII string
from 1 to 32 characters.
The default OUI is listed in the following table.
OUI
00:01:E3
00:03:6B
00:09:6E
00:0F:E2
00:60:B9
00:D0:1E
00:E0:75
00:E0:BB
Global configuration mode.
This command is used to add user defined OUI(s) for the voice VLAN. The OUI
of voice VLAN is used to identify the voice traffic if voice VLAN is enabled.
If the source MAC addresses of received packets comply with the configured OUI
addresses, the received packets are determined as voice packets.
The default OUI cannot be deleted.
This example shows how to add a user defined OUI of voice device.
Vendor
Siemens
Cisco
Avaya
Huawei-3COM
NEC/ Philips
Pingtel
Veritel
3COM
voice-vlan oui
913