Show Lldp Statistics Interface - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show lldp statistics interface

show lldp statistics interface INTERFACE-ID [, | -]
Syntax Description
INTERFACE-ID
,
-
Default
Command Mode
Usage Guideline
Example
Switch> show lldp statistics interface eth3.1
Port ID : eth3.1
------------------------------------------------------------------------
Total Transmits
Total Discards
Total Errors
Total Receives
Total TLV Discards
Total TLV Unknows
Total Ageouts
Switch>
CLI Reference Guide
To display the each physical interface LLDP statistics information, use the show
lldp statistics interface command.
Valid interfaces are physical interface
(Optional) Specify a series of interfaces, or separate a range of interfaces from a
previous range. No space before and after the comma.
(Optional) Specify a range of interfaces. No space before and after the hyphen.
This command has no default settings.
EXEC mode or any configuration mode
The each physical interface LLDP statistics command displays each physical
interface LLDP statistics.
To display statistics information of eth3.1:
: 27
: 0
: 0
: 27
: 0
: 0
: 0
show lldp statistics interface
813